diff --git a/.p10k.zsh b/.p10k.zsh
index e7b460a..34ecca1 100644
--- a/.p10k.zsh
+++ b/.p10k.zsh
@@ -1,8 +1,7 @@
-# Generated by Powerlevel10k configuration wizard on 2025-04-26 at 21:14 EDT.
+# Generated by Powerlevel10k configuration wizard on 2025-04-28 at 16:55 EDT.
 # Based on romkatv/powerlevel10k/config/p10k-lean.zsh, checksum 37983.
-# Wizard options: nerdfont-v3 + powerline, small icons, unicode, lean, 2 lines,
-# disconnected, no frame, compact, many icons, concise, transient_prompt,
-# instant_prompt=verbose.
+# Wizard options: nerdfont-v3 + powerline, small icons, ascii, lean, 2 lines,
+# disconnected, compact, concise, transient_prompt, instant_prompt=verbose.
 # Type `p10k configure` to generate another config.
 #
 # Config for Powerlevel10k with lean prompt style. Type `p10k configure` to generate
@@ -32,7 +31,7 @@
   # The list of segments shown on the left. Fill it with the most important segments.
   typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
     # =========================[ Line #1 ]=========================
-    #os_icon                 # os identifier
+    # os_icon               # os identifier
     dir                     # current directory
     vcs                     # git status
     # =========================[ Line #2 ]=========================
@@ -118,7 +117,7 @@
   )
 
   # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
-  typeset -g POWERLEVEL9K_MODE=nerdfont-v3
+  typeset -g POWERLEVEL9K_MODE=ascii
   # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
   # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
   typeset -g POWERLEVEL9K_ICON_PADDING=none
@@ -164,10 +163,10 @@
   # probably want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false above and
   # POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' ' below.
   typeset -g POWERLEVEL9K_SHOW_RULER=false
-  typeset -g POWERLEVEL9K_RULER_CHAR='─'        # reasonable alternative: '·'
+  typeset -g POWERLEVEL9K_RULER_CHAR='-'        # reasonable alternative: '·'
   typeset -g POWERLEVEL9K_RULER_FOREGROUND=242
 
-  # Filler between left and right prompt on the first prompt line. You can set it to '·' or '─'
+  # Filler between left and right prompt on the first prompt line. You can set it to '·' or '-'
   # to make it easier to see the alignment between left and right prompt and to separate prompt
   # from command output. It serves the same purpose as ruler (see above) without increasing
   # the number of prompt lines. You'll probably want to set POWERLEVEL9K_SHOW_RULER=false
@@ -199,13 +198,13 @@
   # Red prompt symbol if the last command failed.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=196
   # Default prompt symbol.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='>'
   # Prompt symbol in command vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='<'
   # Prompt symbol in visual vi mode.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
   # Prompt symbol in overwrite vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='^'
   typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
   # No line terminator if prompt_char is the last segment.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
@@ -342,14 +341,14 @@
   # parameter. For example, if POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND is not set, it falls
   # back to POWERLEVEL9K_DIR_FOREGROUND.
   #
-  # typeset -g POWERLEVEL9K_DIR_CLASSES=()
+  typeset -g POWERLEVEL9K_DIR_CLASSES=()
 
   # Custom prefix.
   # typeset -g POWERLEVEL9K_DIR_PREFIX='%fin '
 
   #####################################[ vcs: git status ]######################################
   # Branch icon. Set this parameter to '\UE0A0 ' for the popular Powerline branch icon.
-  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON='\uF126 '
+  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=
 
   # Untracked files icon. It's really a question mark, your font isn't broken.
   # Change the value of this parameter to show a different icon.
@@ -357,7 +356,7 @@
 
   # Formatter for Git status.
   #
-  # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
+  # Example output: master wip <42>42 *42 merge ~42 +42 !42 ?42.
   #
   # You can edit the function to customize how Git status looks.
   #
@@ -394,9 +393,9 @@
     if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
       local branch=${(V)VCS_STATUS_LOCAL_BRANCH}
       # If local branch name is at most 32 characters long, show it in full.
-      # Otherwise show the first 12 … the last 12.
+      # Otherwise show the first 12 .. the last 12.
       # Tip: To always show local branch name in full without truncation, delete the next line.
-      (( $#branch > 32 )) && branch[13,-13]="…"  # <-- this line
+      (( $#branch > 32 )) && branch[13,-13]=".."  # <-- this line
       res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}"
     fi
 
@@ -407,9 +406,9 @@
         ]]; then
       local tag=${(V)VCS_STATUS_TAG}
       # If tag name is at most 32 characters long, show it in full.
-      # Otherwise show the first 12 … the last 12.
+      # Otherwise show the first 12 .. the last 12.
       # Tip: To always show tag name in full without truncation, delete the next line.
-      (( $#tag > 32 )) && tag[13,-13]="…"  # <-- this line
+      (( $#tag > 32 )) && tag[13,-13]=".."  # <-- this line
       res+="${meta}#${clean}${tag//\%/%%}"
     fi
 
@@ -429,21 +428,21 @@
     fi
 
     if (( VCS_STATUS_COMMITS_AHEAD || VCS_STATUS_COMMITS_BEHIND )); then
-      # ⇣42 if behind the remote.
-      (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
-      # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
+      # <42 if behind the remote.
+      (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}<${VCS_STATUS_COMMITS_BEHIND}"
+      # >42 if ahead of the remote; no leading space if also behind the remote: <42>42.
       (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
-      (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
+      (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}>${VCS_STATUS_COMMITS_AHEAD}"
     elif [[ -n $VCS_STATUS_REMOTE_BRANCH ]]; then
       # Tip: Uncomment the next line to display '=' if up to date with the remote.
       # res+=" ${clean}="
     fi
 
-    # ⇠42 if behind the push remote.
-    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}"
+    # <-42 if behind the push remote.
+    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}<-${VCS_STATUS_PUSH_COMMITS_BEHIND}"
     (( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" "
-    # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
-    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
+    # ->42 if ahead of the push remote; no leading space if also behind: <-42->42.
+    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}->${VCS_STATUS_PUSH_COMMITS_AHEAD}"
     # *42 if have stashes.
     (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
     # 'merge' if the repo is in an unusual state.
@@ -458,12 +457,12 @@
     # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
     # Remove the next line if you don't want to see untracked files at all.
     (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
-    # "─" if the number of unstaged files is unknown. This can happen due to
+    # "-" if the number of unstaged files is unknown. This can happen due to
     # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
     # than the number of files in the Git index, or due to bash.showDirtyState being set to false
     # in the repository config. The number of staged and untracked files may also be unknown
     # in this case.
-    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─"
+    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}-"
 
     typeset -g my_git_format=$res
   }
@@ -495,7 +494,7 @@
   typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=76
   typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=244
   # Custom icon.
-  # typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=
   # Custom prefix.
   # typeset -g POWERLEVEL9K_VCS_PREFIX='%fon '
 
@@ -519,32 +518,32 @@
   # it will signify success by turning green.
   typeset -g POWERLEVEL9K_STATUS_OK=false
   typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=70
-  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'
+  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='ok'
 
   # Status when some part of a pipe command fails but the overall exit status is zero. It may look
   # like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
   typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=70
-  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔'
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='ok'
 
   # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
   # it will signify error by turning red.
   typeset -g POWERLEVEL9K_STATUS_ERROR=false
   typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='err'
 
   # Status when the last command was terminated by a signal.
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=160
   # Use terse signal names: "INT" instead of "SIGINT(2)".
   typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION=
 
   # Status when some part of a pipe command fails and the overall exit status is also non-zero.
   # It may look like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='err'
 
   ###################[ command_execution_time: duration of the last command ]###################
   # Show duration of the last command if takes at least this many seconds.
@@ -556,7 +555,7 @@
   # Duration format: 1d 2h 3m 4s.
   typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
   # Custom icon.
-  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION=
   # Custom prefix.
   # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook '
 
@@ -848,11 +847,11 @@
   ###########[ timewarrior: timewarrior tracking status (https://timewarrior.net/) ]############
   # Timewarrior color.
   typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=110
-  # If the tracked task is longer than 24 characters, truncate and append "…".
+  # If the tracked task is longer than 24 characters, truncate and append "..".
   # Tip: To always display tasks without truncation, delete the following parameter.
   # Tip: To hide task names and display just the icon when time tracking is enabled, set the
   # value of the following parameter to "".
-  typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+…}'
+  typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+..}'
 
   # Custom icon.
   # typeset -g POWERLEVEL9K_TIMEWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'
@@ -1583,7 +1582,7 @@
   #   P9K_IP_TX_BYTES_DELTA | number of bytes sent since last prompt
   #   P9K_IP_RX_RATE        | receive rate (since last prompt)
   #   P9K_IP_TX_RATE        | send rate (since last prompt)
-  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='$P9K_IP_IP${P9K_IP_RX_RATE:+ %70F⇣$P9K_IP_RX_RATE}${P9K_IP_TX_RATE:+ %215F⇡$P9K_IP_TX_RATE}'
+  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='$P9K_IP_IP${P9K_IP_RX_RATE:+ %70F<$P9K_IP_RX_RATE}${P9K_IP_TX_RATE:+ %215F>$P9K_IP_TX_RATE}'
   # Show information for the first network interface whose name matches this regular expression.
   # Run `ifconfig` or `ip -4 a show` to see the names of all network interfaces.
   typeset -g POWERLEVEL9K_IP_INTERFACE='[ew].*'
@@ -1605,7 +1604,7 @@
   # Show battery in yellow when it's discharging.
   typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=178
   # Battery pictograms going from low to high level of charge.
-  typeset -g POWERLEVEL9K_BATTERY_STAGES='\UF008E\UF007A\UF007B\UF007C\UF007D\UF007E\UF007F\UF0080\UF0081\UF0082\UF0079'
+  typeset -g POWERLEVEL9K_BATTERY_STAGES=('battery')
   # Don't show the remaining time to charge/discharge.
   typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false
 
@@ -1645,7 +1644,7 @@
   # behavior where they contain the end times of their preceding commands.
   typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=false
   # Custom icon.
-  # typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION=
   # Custom prefix.
   # typeset -g POWERLEVEL9K_TIME_PREFIX='%fat '
 
@@ -1655,7 +1654,7 @@
   #
   # Type `p10k help segment` for documentation and a more sophisticated example.
   function prompt_example() {
-    p10k segment -f 208 -i '⭐' -t 'hello, %n'
+    p10k segment -f 208 -i '*' -t 'hello, %n'
   }
 
   # User-defined prompt segments may optionally provide an instant_prompt_* function. Its job
@@ -1718,3 +1717,4 @@ typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a}
 
 (( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
 'builtin' 'unset' 'p10k_config_opts'
+